Stonecontact.com offers a wide range of chainsaw stone cutting machines and other cutters in multiple sizes and designs. Quarry Chain Saw Machines are designed for use in medium hardness stone quarries such as marble, limestone, sandstone, tuff stone etc. But it can also be used in the extraction of hard rocks such as granite from the quarry with the suitable cutting segments for the hardness of the stone.
Quarry Chain Saw Machines can also cut on uneven ground, like cutting on 15 degree slope and also can cut stone blocks without water.
Quarry Chain Saw Machines can blindly cut, don't need to drill ahead of time or do any early work. They can save auxiliary time and large air compressor equipment. Cutting surface is very smooth, it can improve the condition of mines, and the blocks are square and don't need to be trimmed again.
Quarry Chain Saw Machines are quiet and safe in operation, have a good working environment and low labor intensity, only need one person to operate.
Quarry Chain Saw Machines have high cutting efficiency while continuously cutting, in the case of 3000mm cutting depth type, 10 hours continuously working can cut 60 square meters of cutting surface. Cutting cost is lower than that of diamond wire saw machines.
Model：FM- CS3200 Power： 53Kw Input Power and cable： 380V 50HZ， 3×35 mm²+1×10 mm² Capacity of the hydraulic tank： 200L Lubricating oil capacity： 25kg The maximum vertical cutting depth： 3.2m The maximum horizontal cutting depth： 3.2m Kerf width： 40 mm Chain rotation Angle： 360° Cutting chain speed： 0～1.2m/s Quick positioning speed： 30m/h Cutting speed： 0～7 m/h Water supply and Water pressure： 30L/min,3bar(Cutting normal Marble doesn't need water.）
Type: Stone Quarry Machines › Stone Chain Saw Machines › Tunnel Chain Saw Machines
Warranty: 12 Months
Usage: Marble, Limestone, Basalt, Sandstone
Machinery Function Features:
1.Marble chain saws enable dry cutting without water cooling, reducing noise and dust pollution. 2.The marble chain arm saw can be suitable for marble ore bodies of different materials and can be used in one machine. 3.Intelligent settings minimise preparatory work for high productivity, simplifying operation and effectively reducing labour intensity. 4.The orbital chain arm saw is direcly placed on the surface of the mining body. The machine is equipped with 3 orbits as standard. The tracks are
Dry cuts, no water supply required. The products are referred to Italy mainstream manufacturers’design, reasonable layout and structure, convenient operation. The gear boxes are planetary gear boxes, large bearing capacity, supplied by Italian producer. The rails and trolleys are made of alloy steel, big bearing capacity and deformation resistant. The hydraulic components are also from Italy. The main oil pumps and hydraulic motors are made in Germany. The electrical components are mainly from S
Our CSM series chain saw machines are suitable for dry cutting marble and soft stone. They can be used for multiple purposes and can cut the stone horizontally and vertically. Features: High rigidity, ensuring long-term stability and efficient operation; Friendly man-machine interface, easy to operate and maintain; PLC integrated control, realizing no dead angle cutting; The unique hydraulic control system can automatically adjust the cutting parameters according to the hardness of the stone to
The chain saw for rails machine is the most basic type, whose rails are placed on the surface of mining or body, and the rails are used alternately. Each machine can be designed to have two working modes of vertical and horizontal cutting, which is suitable for wide range of marble mines with high mining efficiency.
Chain saw for crawler is the enhanced one of orbital-type chain saw, the biggest characteristic of the machine is equipped with a pedrail walking itself, moving conveniently and flexibly.The machine host and pedrail move alternately in working, which don’t need to cooperate with other hoisting machinery moving track, suitable for outdoor use in mines. The machine can move on the uneven ground, allowing the machine to overcome inclined surfaces up to 25%(14°) The all machine is driven by a radio
Advantages of using chain saw for underground mines 1.Don’ t need to do the large - scale stripping skin and mountain earth , it can mine the finest marble resources directly . 2.Less land acquisition and trees cutting , less slag and gravel, low cost of slagging and vegetation restoration . 3.Fast exploitation , good appearance of blocks , high blocks yield. 4.High production efficiency, it is not affected by the weather , day and night time , and it can control the mining speed progress , and
SMT-CS3400 chain saw for wheel loader consists of chain arm cutting system and wheel loader , mainly used for cuting large blocks and cutting strip ore belt in mine , its features are : 1.This machine is powered by the diesel engine of the wheel loader , which can work independently without external power supply. 2.Mining operators work in the sealed cab in a friendly and safe working environment . 3.The machine can move fast and operate conveniently with high eficiency .
Advantages of using chain saw for underground mines 1.Don’ t need to do the large - scale stripping skin and mountain earth , it can mine the finest marble resources directly . 2.Less land acquisition and trees cutting , less slag and gravel, low cost of slagging and vegetation restoration . 3.Fast exploitation , good appearance of blocks , high blocks yield. 4.High production efficiency, it is not affected by the weather , day and night time , and it can control the mining speed progress , and
Advantages of using chain saw for underground mines 1.Don’ t need to do the large - scale stripping skin and mountain earth , it can mine the finest marble resources directly . 2.Less land acquisition and trees cutting , less slag and gravel, low cost of slagging and vegetation restoration . 3.Fast exploitation , good appearance of blocks , high blocks yield. 4.High production efficiency, it is not affected by the weather , day and night time , and it can control the mining speed progress , and
The chain saw for rails machine is the most basic type, whose rails are placed on the surface of mining or body, and the rails are used alternately. Each machine can be designed to have two working modes of vertical and horizontal cutting, which is suitable for wide range of marble mines with high mining efficiency.
The chain saw for rails machine is the most basic type, whose rails are placed on the surface of mining or body, and the rails are used alternately. Each machine can be designed to have two working modes of vertical and horizontal cutting, which is suitable for wide range of marble mines with high mining efficiency.
Chain saw for crawler is the enhanced one of orbital-type chain saw, the biggest characteristic of the machine is equipped with a pedrail walking itself, moving conveniently and flexibly.The machine host and pedrail move alternately in working, which don’t need to cooperate with other hoisting machinery moving track, suitable for outdoor use in mines. The machine can move on the uneven ground, allowing the machine to overcome inclined surfaces up to 25%(14°) The all machine is driven by a radio
SMT-CS3400 chain saw for wheel loader consists of chain arm cutting system and wheel loader , mainly used for cuting large blocks and cutting strip ore belt in mine , its features are : 1.This machine is powered by the diesel engine of the wheel loader , which can work independently without external power supply. 2.Mining operators work in the sealed cab in a friendly and safe working environment . 3.The machine can move fast and operate conveniently with high efficiency .
Chain saw machine "Victoria" (MKB-11) performs all types of sawing works: vertical, horizontal and at an angle. It works at temperature up to +40 without using cooling liquid.
Chain saws machines, Stationary machines for laboratory / sawmill Chain saw machine The chain saw model CST 965 is a cutting chain mounted on the rear of a wheeled tractor cab, called Terna. The machine is self powered and is autonomous both in handling and positioning. It can perform vertical cuts up to the maximum depth of 3.25 meters on marble, limestone and stone materials of similar hardness. The machine is ideal for squaring blocks and for the making series of front cuts. Arms and chains a
The chain saw machine model ”NF-7.1” is designated for the extraction of marble and stone blocks in the open sky quarries using the most recent technologies. The chain saw “NF-7.1” permits to improve the performances and to reduce to minimum the cost of the cut. The chain saw “NF-7.1” is universal: it can execute vertical and horizontal cuts on materials with compression strength higher than 150 Mpa. The movement of the machine is made through a sprocket and rack element assembled on the rails.
GD-CS2500, GD-CS3200, GD-CS4000,GD-CS6000, GD-CS7500 marble chain saw is the special marble quarrying equipment, which consists of a host, moving platform, rails, chain arm, chain, hydraulic system, electric control system, chain lubrication pump and other parts. Chain arm, cutting chain and the machine move on the rails, the machine can rapidly adjust oil cylinder action by the hydraulic pressure drive. The chain arm may rotate in 360 degree for vertical and horizontal cutting which can transla
GD-CS3200-XD marble chain saw is the special marble quarrying equipment, which consists of a host, moving platform, rails, chain arm, chain, hydraulic system, electric control system, chain lubrication pump and other parts. Chain arm, cutting chain and the machine move on the rails, the machine can rapidly adjust oil cylinder action by the hydraulic pressure drive. The chain arm may rotate in 360 degree for vertical and horizontal cutting which can translate freely according to the mining requir
GD-CS3200-YT marble chain saw is the special marble quarrying equipment, which consists of a host, moving platform, rails, chain arm, chain, hydraulic system, electric control system, chain lubrication pump and other parts. Chain arm, cutting chain and the machine move on the rails, the machine can rapidly adjust oil cylinder action by the hydraulic pressure drive. The chain arm may rotate in 360 degree for vertical and horizontal cutting which can translate freely according to the mining requir
GD-CS3200-LY marble chain saw is the special marble quarrying equipment, which consists of a host, moving platform, rails, chain arm, chain, hydraulic system, electric control system, chain lubrication pump and other parts. Chain arm, cutting chain and the machine move on the rails, the machine can rapidly adjust oil cylinder action by the hydraulic pressure drive. The chain arm may rotate in 360 degree for vertical and horizontal cutting which can translate freely according to the mining requir
LD-CS2500-P marble chain saw is the special marble quarrying equipment, which consists of a host, moving platform, rails, chain arm, chain, hydraulic system, electric control system, chain lubrication pump and other parts. Chain arm, cutting chain and the machine move on the rails, the machine can rapidly adjust oil cylinder action by the hydraulic pressure drive. The chain arm may rotate in 360 degree for vertical and horizontal cutting which can translate freely according to the mining require
Crawler-type chain saw is the enhanced one of orbital-type chain saw, the biggest characteristic of the machine is equipped with a pedrail walking itself, moving conveniently and flexibly. The machine host and pedrail move alternately in working , which don't need to cooperate with other hoisting machinery moving track, suitable for outdoor use in mines. Each machine can be designed to have two kinds of working model--- vertical and horizontal cutting.
Mobile Single Wire Saw with Crawler harmonizes the advantages of a stationary machine with a mobile quarry machine. It is composed of a single wire structure installed on a track chassis and is equipped with a diesel engine, which can be easily configured for transport from quarry to quarry on trailer. Equipped with 4 hydraulic stabilizers, the cutting arch is rotated and brought to the desired height, thus aligning the wire to the face of the block to be cut. The arch structure slides verticall
Marble chain saw is for marble quarrying. The chain arm may rotate in 360 degree for vertical andhorizontal cutting which can translate freely according to the mining requirement. The cuttingspeed can be adjusted according to the hardness ofstone when the moving speed of moving platform between 0-10.3m/h.
Dry cuts, no water supply required. The products are referred to Italy mainstream manufacturers’ design, reasonable layout and structure, convenient operation. The gear boxes are planetary gear boxes, large bearing capacity, supplied by Italian producer. The rails and trolleys are made of alloy steel, big bearing capacity and deformation resistant. The hydraulic components are also from Italy. The main oil pumps and hydraulic motors are made in Germany. The electrical components are mainly from
Type: Stone Quarry Machines › Stone Chain Saw Machines › Bank Chain Saw Machines
Warranty: 12 Months
Usage: Marble, Limestone, Sandstone
Machinery Function Features:
The Diamond Belt Quarry Saw is the most efficient way of quarrying blocks of limestone, sandstone, or marble. You can easily turn ledges over and break blocks loose using airbags after the cuts have been completed. The Diamond Belt Quarry Saw travels on track sections that can purchased in 5 or 10 foot lengths. Leveling jacks are installed on the track to level the uneven quarry floor and to keep the saw level while cutting. The rotating saw housing allows owners to make cuts on either side of t
Fantini Tunnel Chain saw machine GU 70-R-XC Sawmill Machine for Tunnels Installed power: 60 kW Weight: 30,000 Kg Electrical power supply: 400V/50 Hz Cutting depth: 3.0 m (XXL) Tunnel height: 5.15-5.62 m max GU70RXC Sawmill Machine for Tunnels Chain Saw Model GU70RXC is the most popular machine in the world for opening up and exploring a tunnel cave. Thanks to a lanyard positioned on the front frame, the track carrying the arm can rotate by 360 ° to allow vertical and horizontal cuts at the tunne
Type: Stone Quarry Machines › Stone Chain Saw Machines › Bank Chain Saw Machines
Warranty: 12 Months
Usage: Marble, Limestone, Sandstone, Travertine
Machinery Function Features:
The chain saw machine model ”NF-7.1” is designated for the extraction of marble and stone blocks in the open sky quarries using the most recent technologies. The chain saw “NF-7.1” permits to improve the performances and to reduce to minimum the cost of the cut. The chain saw “NF-7.1” is universal: it can execute vertical and horizontal cuts on materials with compression strength higher than 150 Mpa. The movement of the machine is made through a sprocket and rack element assembled on the rails.
Type: Stone Quarry Machines › Stone Chain Saw Machines › Backhoe Squaring Chain Saw
Warranty: 12 Months
Usage: Marble, Limestone, Sandstone
Machinery Function Features:
QST3000D chain saw machine on backhoe CAT432 is the last frontier for squaring blocks of marble and stones. QST3000D technology is driven by the very powerful motor of CAT432 and the hydraulic circuit for moving the chain saw was studied together with Caterpillar technicians and our technical staff.The advantages of this technology are a lot o : i.e. you can work day and night and in every weather conditions because the operator inside the cabin can decide the temperatures; you can work without
Type: Stone Quarry Machines › Stone Chain Saw Machines › Squaring Chain Saw Machines
Warranty: 12 Months
Usage: Marble, Limestone, Sandstone, Travertine
Machinery Function Features:
The SV-C/70 mod. chain saw has been designed and built to execute vertical and frontal cuts on large banks or large blocks in ornamental stone quarries, and does not require water cooling. The machine is mounted on a fifth wheel track system enabling it to negotiate even the most difficult terrain, and the endothermic diesel motor guarantees autonomy and independence. It is capable of achieving cutting depths of up to 6.2 m (length) and 7.0 m (height). Installed power: 62.5 Kw Weight: 24,000 Kg
Type: Stone Quarry Machines › Stone Chain Saw Machines › Tunnel Chain Saw Machines
Warranty: 12 Months
Usage: Marble, Limestone, Sandstone
Machinery Function Features:
The STANDISH DOUBLE BAR HORIZONTAL SAW allows the owner to make multiple cuts quickly and easily in one set-up. This unique saw utilizes 1 1/2” wide diamond belts (2) and 6’-3” cutting bars (2) to make horizontal cuts in the face of a vertical wall. The machine will make a bottom cut and a mid-wall cut at the same time with a top cut being made during a reverse pass along the wall. Features: • Double Bar with diamond cutting belt • Cutting belt drive—75 H.P. • Center to Center distance of cuttin
Terna FANTINI Block Sawing Machine The Terni Fantini is a machine made from a rubber tired JCB vehicle and a group of Fantini cutters. The extreme versatility of its’ rubberised four-wheel drive allows you to reach cutting areas quickly, whether they are: blocks spread over the quarry, banks on the ground or even cuts executed directly at the front of the bank. As the machine travels to the block and not the other way round, the Fantini back allows you to save time and money. The operator works
70BU-C Block Sawing Machine Chain Saw Model 70BU-C is a self-propelled crawler for vertical cutting, and can be fitted with arms that can cut up to 4.0 metres deep. The machine is fitted with a unique self-propelled track with hydraulic stabiliser feet. It can autonomously move into different areas of a quarry to make cuts into floors or square off blocks, without the need for water. The machine is fitted with a diesel engine which allows completely autonomous operation, eliminating the need for
Type: Stone Quarry Machines › Stone Chain Saw Machines › Bank Chain Saw Machines
Warranty: 24 Months
Usage: Marble, Limestone, Quartzite, Sandstone
Machinery Function Features:
TECHNICAL SPECIFICATIONS Model ST 450.2 VH Power of main electric motor 45 Kw / 61 Hp Hydraulik tank capacity 160 Lt. Cutting width 42 mm Useful cutting depth 4,20 mt (max) Rotation of cutting jib 360° Weight 5.100 kg. This model is designed for open top quarries.
Type: Stone Quarry Machines › Stone Chain Saw Machines › Backhoe Squaring Chain Saw
Warranty: 12 Months
Usage: Marble, Limestone, Sandstone, Travertine
Machinery Function Features:
QST3000D Chain Saw Machine on Backhoe The QST3000D chain saw machine mounted on a backhoe represents the latest frontier for squaring blocks of marble and natural stone. Its technology is powered by the backhoe’s powerful motor , and the hydraulic circuit for moving the chain saw was developed in collaboration with Caterpillar technicians and our own technical team. Key Advantages Operates day and night in all weather conditions , as the operator can control the cabin temperature. Can work witho
Type: Stone Quarry Machines › Stone Chain Saw Machines › Bank Chain Saw Machines
Warranty: 12 Months
Usage: Marble, Limestone, Sandstone, Travertine
Machinery Function Features:
The Fantini 50.90 chain saw machine is designed for cutting medium soft stone, and cutting and squaring in quarries with sloped banks. It can be supplied with an arm with an effective cutting depth of up to 2.0 m. The machine can perform horizontal and vertical cuts without the need for cooling water and is available in either the modular rail (P) , or single rail (BU), version; in the latter configuration, the machine can be repositioned by moving it along a single rail, without the need for li
Type: Stone Quarry Machines › Stone Chain Saw Machines › Backhoe Squaring Chain Saw
Warranty: 12 Months
Usage: Marble, Limestone, Sandstone, Travertine
Machinery Function Features:
QST3000D Chain Saw Machine on Backhoe The QST3000D chain saw machine mounted on a backhoe represents the latest frontier for squaring blocks of marble and natural stone. Its technology is powered by the backhoe’s powerful motor , and the hydraulic circuit for moving the chain saw was developed in collaboration with Caterpillar technicians and our own technical team. Key Advantages Operates day and night in all weather conditions , as the operator can control the cabin temperature. Can work witho
Type: Stone Quarry Machines › Stone Chain Saw Machines › Tunnel Chain Saw Machines
Warranty: 12 Months
Usage: Marble, Limestone, Basalt, Sandstone
Machinery Function Features:
1.Marble chain saws enable dry cutting without water cooling, reducing noise and dust pollution. 2.The marble chain arm saw can be suitable for marble ore bodies of different materials and can be used in one machine. 3.Intelligent settings minimise preparatory work for high productivity, simplifying operation and effectively reducing labour intensity. 4.The orbital chain arm saw is direcly placed on the surface of the mining body. The machine is equipped with 3 orbits as standard. The tracks are
Marble chain saw is for marble quarrying. The chain arm may rotate in 360 degree for vertical andhorizontal cutting which can translate freely according to the mining requirement. The cuttingspeed can be adjusted according to the hardness ofstone when the moving speed of moving platform between 0-10.3m/h.
Stonecontact.com offers a wide range of chainsaw stone cutting machines and other cutters in multiple sizes and designs. Quarry Chain Saw Machines are designed for use in medium hardness stone quarries such as marble, limestone, sandstone, tuff stone etc. But it can also be used in the extraction of hard rocks such as granite from the quarry with the suitable cutting segments for the hardness of the stone.
Quarry Chain Saw Machines can also cut on uneven ground, like cutting on 15 degree slope and also can cut stone blocks without water.
Quarry Chain Saw Machines can blindly cut, don't need to drill ahead of time or do any early work. They can save auxiliary time and large air compressor equipment. Cutting surface is very smooth, it can improve the condition of mines, and the blocks are square and don't need to be trimmed again.
Quarry Chain Saw Machines are quiet and safe in operation, have a good working environment and low labor intensity, only need one person to operate.
Quarry Chain Saw Machines have high cutting efficiency while continuously cutting, in the case of 3000mm cutting depth type, 10 hours continuously working can cut 60 square meters of cutting surface. Cutting cost is lower than that of diamond wire saw machines.
Ask a Question
Could not find the answer you need? Ask about Limestone Chain Saw Machine.
Can a quarry chain saw machine cut granite?View answer⌄
Asked by Visitor
Quarry chain saw machines are designed for use in medium hardness stone quarries but with the suitable cutting segments they also can be used in granite quarries.
Italy
China
Greece
Turkey
United States
Russian Federation
4YR
